Abstract
Currently, Lithium ion batteries (LIBs) are state-of-the-art (SOTA) energy storage systems. There is an urgent need for further improvements in terms of gravimetric and volumetric energy of LIBs, for a successful market penetration of electric vehicles. Therefore, development of advanced negative electrode materials is of high interest. Here, silicon (Si) is a promising active material to replace SOTA graphite due to its ~10-fold higher specific capacity and being also high abundant.However, Si undergoes severe volume changes up to 280% during (de-)lithiation, resulting in fast capacity fading and short cycle life due to the continuous re-formation of the solid electrolyte interphase (SEI), leading to active lithium losses (ALL). In order to counteract ALL, research is focusing on suitable pre-lithiation processes. Among different pre-lithiation methods, chemical pre-lithiation by application of lithium arene complex (LAC) solutions is promising as it is a fast, easy and cost-effective method.In this work, the stability of three different solvents to produce a 4,4’-dimethylbiphenyl (4,4’-DMBP) LAC is investigated via solid phase microextraction gas chromatography-mass spectrometry method (SPME-GC-MS). The optimized LAC solution is used to evaluate the stability of different binder systems with respect to electrode manufacturing. Based on these fundamental insights, different parameters such as the reaction temperature (T) and pre-lithiation time (PL-t) are systematically investigated regarding suitable degrees of pre-lithiation (DOPL) of the negative electrode. DOPLs up to a plateau of 55% can be obtained by using 0.5 M 4,4’-DMBP in tetrahydrofuran (THF) as LAC solution. Higher temperature during the reaction reduces the PL-t until achieving a pre-lithiation plateau. The impact of the parameters T and PL-t towards the electrochemical performance of Si-based LIB full cells is thoroughly investigated. It is shown that this approach improves the cycle life of a silicon nanowire graphite composite negative electrode up to 600% compared to the pristine electrodes
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.