Strain-softening behaviour of sand in strain path testing under plane-strain conditions

Abstract

Experimental data are presented in this paper to study the strain-softening behaviour of sand under plane-strain conditions. K0 consolidated strain path tests were conducted using a new plane-strain apparatus. The stress–strain behaviour of medium dense sand under plane-strain conditions was characterized. The test results show that the occurrence of pre-failure strain softening under plane-strain conditions is affected by the void ratio, the strain increment ratio and the initial effective confining stress. This is consistent with previous findings established under axisymmetric conditions. However, a pre-failure strain-softening behaviour in plane-strain tests conducted under high-confining stresses may consist of three stages, namely, material softening, banding softening, and ultimate state. This observation is different from that in triaxial tests where banding softening does not normally occur.