Abstract

Misfit strain relaxation in tensile-strained Si grown at 600 °C on (0 0 1) SiGe-on-insulator substrates is experimentally studied for a tensile strain range between 0.4 and 1.2%. The critical thickness is found to be rather thinner than Houghton's critical thickness for a compressively-mismatched SiGe/Si(0 0 1) system. The thinner critical thickness in tensile-strained Si is attributed to the fact that the stress-relieving misfit dislocations are 90° partial dislocations, instead of 60° misfit dislocations for the compressive SiGe/Si(0 0 1) system. With increasing strained-Si layer thickness thicker than the critical thickness, 60° misfit dislocation is found to be increasingly formed but the strain relaxation is sluggish. For a supercritical thickness ten times thicker than the critical thickness the tensile strain mostly remains. The initial strain relaxation is discussed in terms of the misfit dislocation morphology.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.