Abstract
The need exists for a failure time schema to predict composite component lifetimes from quasi-static to dynamic strain rates. Models need to incorporate temperature, loading rate, and the time to failure of the composite components. An approach to describe the effects of strain rate and temperature on the mechanical properties of an E-glass/vinyl ester composite system is presented and verified with experimental data. A representation of the time to failure of the composite was constructed using the Monkmann-Grant equation, relating the applied steady state strain rate and the time to failure. Strain rates of 10−6 to 1.6 s−1 were achieved and experiments were conducted at room temperature, 80 and 120°C. It was found that the composite system exhibited nearly a constant strain to failure over the applied rates and temperatures. The test data verified an approach to a failure time estimation scheme for steady state strain rate utilizing the Monkmann-Grant approach.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.