Strain Hardening Cementitious Composite in Reinforced Concrete Cover Zone for Crack Width Control

Abstract

In the current study, experiments were carried out to investigate the cracking behaviour of reinforced concrete beams consisting of 1-cm-thick layer of Strain Hardening Cementitious Composite (SHCC) in the concrete cover zone. The hybrid SHCC/concrete beams with different types of interfaces were tested and compared with control reinforced concrete beams without a SHCC layer. A new SHCC/concrete interface that features a weakened chemical adhesion but an enhanced mechanical bonding was also developed to facilitate the activation of SHCC. The beams were tested in four-point bending configuration, while Digital Image Correlation (DIC) was used to evaluate crack pattern development and crack widths. Results show that hybrid beams possessed similar load bearing capacity but exhibited an improved cracking behaviour as compared to the control beam. The maximum crack width of the best performing hybrid beams exceeded 0.3 mm at approximately 53.3 kN load, whereas in the control beam it exceeded 0.3 mm at only 32.5 kN load. It is thus expected that the hybrid beams developed in the current study will possess an improved durability and enhanced self-healing potential as a result of having smaller cracks, leading to an extended service life at the expense of minimal additional cost.