Abstract
In this paper, the methods developed by [1] are used to analyze flowback data, which involves modeling flow both before and after the breakthrough of formation fluids. Despite the versatility of these techniques, achieving an optimal combination of parameters is often difficult with a single deterministic analysis. Because of the uncertainty in key model parameters, this problem is an ideal candidate for uncertainty quantification and advanced assisted history-matching techniques, including Monte Carlo (MC) simulation and genetic algorithms (GAs) amongst others. MC simulation, for example, can be used for both the purpose of assisted history-matching and uncertainty quantification of key fracture parameters. In this work, several techniques are tested including both single-objective (SO) and multi-objective (MO) algorithms for history-matching and uncertainty quantification, using a light tight oil (LTO) field case. The results of this analysis suggest that many different algorithms can be used to achieve similar optimization results, making these viable methods for developing an optimal set of key uncertain fracture parameters. An indication of uncertainty can also be achieved, which assists in understanding the range of parameters which can be used to successfully match the flowback data.
Highlights
In recent years, as a result of low gas prices and relatively high oil prices, many producers have turned their attention to light tight oil (LTO) reservoirs as a means of producing commercial wells
Several algorithms were tested for the purpose of uncertainty analysis and assisted history-matching of flowback data
Monte Carlo (MC) simulation can effectively be applied for both uncertainty quantification and assisted-history matching, assuming enough trials are conducted to effectively cover the search space
Summary
As a result of low gas prices and relatively high oil prices, many producers have turned their attention to LTO reservoirs as a means of producing commercial wells. Much like shale gas reservoirs, LTO reservoirs are typically very low in permeability and require extensive hydraulic fracturing to allow for commercial production. Operators are seeking new methods to estimate hydraulic fracture properties, early in the well life. The majority of the literature has focused on shale gas reservoirs, there has been a substantial amount of research conducted in analyzing flowback from LTO wells. These methods have been applied to LTO plays across North America. In this paper only the papers relevant to MC simulation and application of evolutionary algorithms to the flowback problem will be discussed
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.