Abstract
The most generally used technique of load power monitoring is non-intrusive load monitoring, which requires only one device to be mounted on the bus to monitor the current parameters and the working state of various types of appliances within the total load. It is required to investigate a cost-effective non-intrusive load monitoring and identification system that can perform a range of duties such as fault monitoring, energy monitoring, and fault analysis without requiring a significant number of sensing components. Measurement of electrical values of commonly used home appliances during stable operation, followed by feature extraction and electrical feature analysis to identify appliance types, can help residential users understand appliance habits and consciously reduce consumption and losses while enabling fault detection. The STM32F103RCT6 core control chip and the SUI-101 energy metering module are used in this system to monitor and evaluate load characteristics using the Modbus-RTU communication protocol. The active and reactive power of the load is measured and recorded in the learning mode; in the analysis and identification mode, the electrical parameters of the current appliance, such as current, voltage, active power, reactive power, frequency, and power factor, can be displayed in real-time, and the corresponding load can be deduced using binary simulation and the Euclidean distance matching method. The device has a short learning time and good identification accuracy for typical household appliances, according to the system test, and can satisfy the analysis and recognition of electrical appliances in a regular domestic setting. The current device design combines the advantage of cheap cost, low power consumption, and portability, making it a viable alternative for domestic appliance identification and monitoring.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.