Stimulation of atrazine degradation by activated carbon and cathodic effect in soil microbial fuel cell

Abstract

Soil microbial fuel cells (MFCs) have been increasingly studied in recent years and have attracted significant attention as an environmentally sustainable bioelectrochemical technology. However, the poor conductivity of the soil matrix and the neglect of the cathodic function have limited its application. In this study, quartz sand and activated carbon were subjected to investigation on their influence on atrazine degradation. Atrazine was introduced in different layers (cathode, upper layer) to explore the cathodic effect on atrazine removal. The results revealed that activated carbon could reduce the internal resistance (693 Ω) and generate the highest power density (25.51 mW/m2) of the soil MFCs, and thus increase the removal efficiency (97.92%) of atrazine. The dynamic degradation profiles of atrazine were different for different adding layers. The cathode electrode acted as an electron donor could increase the distance of the effective influence of the soil MFCs’ cathode from the middle to the cathode layer. The cathode (region) and the region close to the cathode could degrade atrazine with the atrazine removal efficiencies ranging from 60.67% to 92.79%, and the degradation ability of the cathode was stronger than that of other layers. The degradation effect followed the order: cathode > upper > lower > middle). Geobacter, Desulfobulbus, and Desulfuromonas belonging to the δ-Proteobacteria class were identified as the dominant electroactive microorganisms in the anode layer, while their relative abundances are quite low in the upper and cathode layers. Pseudomonas is an atrazine-degrading bacterium, but its relative abundance was only 0.13–0.51%. Thus, bioelectrochemistry rather than microbial degradation was the primary driving force.