Abstract
Abstract The stiffness of structural elements (columns, beams, and slabs) significantly contributes to the overall stiffness of reinforced concrete (RC) high-rise buildings (H.R.B.s) subjected to earthquake. In order to investigate what percentage each type of element contributes to the overall performance of an H.R.B. under seismic load, the stiffness of each type of element is reduced by 10% to 90%. A time history analysis by SAP2000 was performed on thirteen 3D models of 12-story RC buildings in order to illustrate the contribution of column stiffness and column cross sections (rectangular or square), building floor plans (square or rectangular), beam stiffness and slab stiffness, on building resistance to an earthquake. The stiffness of the columns contributed more than the beams and slabs to the earthquake resistance of H.R.B.s. Rectangular cross-section columns must be properly oriented in order for H.R.B.s and slender buildings to attain the maximum resistance against earthquakes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.