Abstract
In this paper, a miniaturized weighing cell that is based on a micro-electro-mechanical-system (MEMS) is discussed. The MEMS-based weighing cell is inspired by macroscopic electromagnetic force compensation (EMFC) weighing cells and one of the crucial system parameters, the stiffness, is analyzed. The system stiffness in the direction of motion is first analytically evaluated using a rigid body approach and then also numerically modeled using the finite element method for comparison purposes. First prototypes of MEMS-based weighing cells were successfully microfabricated and the occurring fabrication-based system characteristics were considered in the overall system evaluation. The stiffness of the MEMS-based weighing cells was experimentally determined by using a static approach based on force-displacement measurements. Considering the geometry parameters of the microfabricated weighing cells, the measured stiffness values fit to the calculated stiffness values with a deviation from -6.7 to 3.8% depending on the microsystem under test. Based on our results, we demonstrate that MEMS-based weighing cells can be successfully fabricated with the proposed process and in principle be used for high-precision force measurements in the future. Nevertheless, improved system designs and read-out strategies are still required.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.