Abstract
This paper presents a method for applying the ISO 10303-238 (AP-238) standard in robotic machining operations by using two industrial robots. The method encompasses programming, simulation and machining by industrial robots. Application and validation of robotized machining is performed using two industrial robots, and the following tools are used: (a) a commercial CAD/CAM software with a plug-in to generate STEP-NC files (AP-238); (b) simulation with a STEP-NC-compliant software using two virtual robot models, as well as the generation of G-code files through postprocessors; and (c) two industrial robots (ASEA IRB6-S2 and LOLA 50) using the LinuxCNC controller adapted to STEP-NC. Initially, a 3D part is designed using any CAD system, and it is sent through the Internet to a CAM specialist who uses a commercial software to generate a process plan to manufacture the part. Operators of the robots download the part and its process plan information in the STEP-NC format, simulate its machining through the working steps and then perform machining using the robots.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Brazilian Society of Mechanical Sciences and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
