Steam Injection Project in Heavy-Oil Diatomite

Abstract

Summary A steam injection project was conducted in diatomite containing heavy, biodegraded oil (12°API, ∼3,000 cp) in the South Belridge field, Kern County, California. The diatomite interval tested (the San Joaquin, Etchegoin, and Belridge diatomites) underlies an active steamflood in the sandstone of the Tulare formation. Initially, the test was to determine the viability of cyclic steam recovery from an unpropped, steam fractured completion in the diatomite. Four standard steam cycles were completed, with sluggish oil recovery [oil–steam ratios (OSR) were less than 0.1]. The well was then hydraulically fractured and propped. Two additional steam cycles were completed that had considerably greater oil recovery (OSR>0.2). The project was then configured for steamdrive by drilling a closely spaced producer. The new producer was initially completed with a propped hydraulic fracture and cycled once. The original cyclic producer was converted to continuous injection, and a two-well steamflood was operated for more than 1 year. During the steamflood, heavy oil was mobilized and response has been continuous. The configuration of the "pattern," with only one producer, results in poor capture efficiency. The performance of this incomplete pattern has been, as expected, poor (<0.1 OSR), but steam injection is shown to be a promising recovery technique for the heavy oil diatomite. The process is applicable to California diatomites, or any other high porosity, low permeability, shallow reservoirs that contain a significant concentration of heavy oil.