Abstract
Abstract Experimental load, stiffness and attitude angle data for a pair of 2 1/2-in-dia, 3 3/4-in-long externally pressurized air journal bearings are compared with two small eccentricity perturbation theories. Results show that load capacity is generally less than predicted by either theory, however, agreement with the small eccentricity pressure perturbation theory is better than with the linearized PH theory. Self-acting effects from journal rotation are greatest at the higher eccentricity ratios and lower supply pressures. Attitude angles vary with shaft speed as predicted by theory but are generally larger in magnitude. Measured air mass flow through the bearings agreed well with calculated values. Results were obtained for speeds up to 25,000 rpm and radial loads varied up to 20.2 psi.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.