Steady State Heat Losses from Horizontal Pipes in an Air-Filled Rectangular Concrete Duct

Abstract

Factors influencing the steady state heat loss behaviours of horizontal ‘supply’ and ‘return’ hot-water pipes, within an atmospheric pressure air-filled, relatively cold, horizontal rectangular trench, are considered. An experimental investigation concerning the effects of the displacement ratios for the two pipes revealed the optimal configuration, that is one which achieves a minimum steady state rate of heat loss from the supply pipe. For one set of temperatures for the pipes and trench walls, the optimal configuration of the supply and return pipes occurred at displacement ratios of +0.70 and −0.05, that is with the supply pipe in the upper region of the cavity and the return pipe vertically below it, the pipes being equidistant from the vertical walls of the trench. This configuration is of significance with respect to achieving maximum energy thrift for district heating pipelines, because it differs radically from the ‘side-by-side’ arrangement of pipes conventionally adopted in district heating practice.