Status of Axial Heterogeneous Liquid-Metal Fast Breeder Reactor Core Design Studies and Research and Development

Abstract

The current status of axial heterogeneous core (AHC) design development in Japan, which consists of an AHC core design in a pool-type demonstration fast breeder reactor (DFBR) and research and development activities supporting AHC core design, is presented. The DFBR core design objectives developed by The Japan Atomic Power Company include (a) favorable core seismic response, (b) core compactness, (c) high availability, and (d) lower fuel cycle cost. The AHC concept was selected as a reference pool-type DFBR core because it met these objectives more suitably than the homogeneous core (HOC). The AHC core layouts were optimized emphasizing the reduction of the burnup reactivity swing, peak fast fluence, and power peaking. The key performance parameters resulting from the AHC, such as flat axial power/flux distribution, lower peak fast fluence, lower burnup reactivity swing, etc., were evaluated in comparison with the HOC. The critical experiments at the Japan Atomic Energy Research Institute’s Fast Critical Assembly facility demonstrate the key AHC performance characteristics. The large AHC engineering benchmark experiments using the zero-power plutonium reactor and the AHC fuel pin irradiation test program using the JOYO reactor are also presented.