Abstract
Baobab fruit shell (BFS) biomass was used as an alternative precursor for producing high surface area and microporous baobab fruit shell activated carbon (BFS-AC) by chemical activation using KOH. Scanning electron microscope (SEM) was performed for the characterization of baobab fruit shell activated carbon. The adsorption property of BFS-AC for the removal of phenol from aqueous solution was evaluated. The effect of key adsorption parameters such as the contact time (10-20 min), BFS-AC dose (2.5-3.5 g/L), pH (1-3), and agitation speed (150-250 rpm) were optimized using a response surface methodology (RSM) with faced centered central composite design (FCCCD). Consequently, a maximum adsorption capacity (196.86 mg/g) was achieved at 15 min of contact time, 2 of pH, 3 g/L of adsorbent dosage, and 250 rpm of agitation speed. The results reveal that BFS-AC has an efficient performance for the removal of phenol from aqueous media.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
