Abstract

Compressed air energy storage systems must promptly adapt to power network demand fluctuations, necessitating a high surge margin in the compression system to ensure safety. It is challenging to completely eliminate blade geometric variations caused by limited machining precision, the important effects of which should be considered during aerodynamic shape design and production inspection. The present paper explores the uncertainty impact of geometric deviations on the stability margin of a multi-stage axial compressor at a low rotational speed. Initially, an adaptive polynomial chaos expansion-based universal Kriging model is introduced, and its superior response performance in addressing high-dimensional uncertainty quantification problems is validated through rigorous analytical and engineering tests. Then, this model is used to statistically evaluate the stability margin improvement (SMI) of the compressor due to the Gaussian and realistic geometric variabilities separately. The results show that the mean and standard deviation of SMI are −0.11% and 0.5% under the Gaussian geometric variability, while those are 0.33% and 0.39% under the realistic variability. For both the geometric variabilities, the stagger angle and maximum thickness deviations of the first-stage rotor are the most influential parameters controlling the uncertainty variations in the stability margin. Finally, the underlying impact mechanism of the influential geometric deviations is investigated. The variation in the stability margin caused by the geometric deviations primarily results from the alteration of inlet incidences, affecting the size of the tip leakage vortex blockage and boundary-layer separation regions near the blade tip of the first-stage rotor.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call