Statistical analysis on ambient RF energy harvesting for low‐power wireless applications

Abstract

SummaryRenewable energy sources from the earth constitute another option apart from the available ones for wellspring of energy for economizing on cost of power supply. The energy obtained from ambient sources is called energy harvesting. Energy‐harvesting low‐power systems have acquired a remarkable consideration as a viable hotspot for expanding both energy efficiency and spectral efficiency. Radio frequency (RF) energy harvesting from ambient source is a promising technique for fulfilling the irreplaceable power prerequisites for powering the low‐power devices. Hence, it requires the development of an antenna for harvesting RF energy. In this paper, a coplanar waveguide (CPW) antenna has been designed and fabricated using FR4 lossy substrate. This CPW antenna covers frequency bands from the most important RF patrons (GSM 900, GSM 1800, 3G, and Wi‐Fi) within the frequency range from (0.58 to 3 GHz) with a percentage fractional bandwidth of 116% with the center frequency of 1.65 GHz. The fabricated antenna then has been experimentally validated at SSN College of Engineering campus. The effects on the RF power density level for CPW antenna are examined by statistical approach known as Taguchi method. The L9 and L8 orthogonal arrays and analysis of variance are implemented to analyze the execution qualities. The CPW antenna control factors are distance, time, and number of receivers. Then, statistical test (P) are used to determine the significant factors on RF power density.