Abstract
Two approaches are used to derive differential equations, stiffness coefficients, and fixed‐end forces for the analysis of structural systems composed of Timoshenko beam‐columns that may be supported by an elastic foundation. The analysis is for the evaluation of the critical static axial load and buckling mode‐shapes of a structure with consideration of elastic media, bending, and shear deformations. The two approaches differ in terms of the assumed shear component of the static axial load on the cross section. The first approach is based on the assumption that the shear component of the axial load is calculated from the total slope, which consists of the bending and shear slope. In the second approach, the shear component of the axial load, however, is calculated only from the bending slope. Analytical expressions for a typical simple beam are derived to show the influence of a foundation parameter on the buckling modes. It is observed that the critical axial loads are significantly reduced when shear d...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
