Abstract
This work reports on the effect of the amount (0, 10, and 30 wt %) and type of HA powder incorporated into an acrylic bone cement on the tensile properties, compression properties, and fracture toughness. The three different types of HA powders used were synthesized in the laboratory and coated with a silane agent prior to incorporation into the cement powder, and differed in particle size, water content, surface area, and crystallinity. It was found that the inclusion of any type of HA powder led to an increase in the tensile modulus (ET), but all the other mechanical properties of the cement decreased (relative to the values of the unfilled cement). The increase in ET is attributed to the good adhesion between the filler and the cement matrix, which is due to the silane coating agent. The decrease in the other mechanical properties may be a consequence of HA powder agglomeration and porosity. Hydroxyapatite morphology and crack-growth mechanisms were analyzed by scanning electronic microscopy (SEM).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Biomedical Materials Research Part B: Applied Biomaterials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
