Abstract
In this paper, γ-aminopropyltrimethoxysilane treated poly(vinyl chloride) (PVC)/rice husk ash (RHA) composites were successfully prepared by a reactive extrusion process. Experimental results revealed that both the tensile modulus and tensile strength increased at all silane coupling agent concentrations. The composites with 1 wt% silane exhibited the highest impact strength with 44 % increment. For the untreated composites, poor interfacial adhesion between PVC and RHA was clearly observed. Below the glass transition temperature (Tg), the silane induced higher storage modulus (E ′) but it seemed to be independent of E′ above Tg. Total water absorption at 90 days reduced by 38 % when the silane was added at 1 wt%, which confirmed that some voids were eliminated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
