Abstract
ABSTRACTBiological filtration is a process that can be used for ammonium removal from water. The removal of ammonium is based on the nitrification process. Nitrification depends on many factors, such as water quality and filtration process parameters. To investigate the influence of filtration rate on the nitrification efficiency, nitrifying biofilters were formed at the pilot plant in the industry for drinking water production from surface water. The new biological filters were started under optimal conditions for biofilm formation. After the biofilm formation, the influence of the filtration rate on nitrification was examined over 3 months (from November to January). The time required for the spontaneous growth of nitrifying bacteria on the new filters was around 70 days. The operating conditions at the start-up period were the continuous flow of water containing γ(NH4+) ≈ 1mg/L, dissolved oxygen in a concentration >9 mg/L, filtration rate <1 m/h, inlet water temperature >12 °C and pH from 7.8 to 8. After the complete formation of the nitrifying biofilm, the percentage of NH4+ removal was greater than 95% for all tested filtration rates, from 0.5 to 8.4 m/h, at γ(NH4+) from 1 to 2.5 mg/L and raw water temperature from 13 to 7°C.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
