Abstract
The start-up of a biological nitrifying system to treat high-strength ammonium wastewater must be done carefully to avoid ammonium or nitrite build-up and subsequent system destabilization due to inhibition. This article shows the start-up with automatic control of a complete nitrification system in a pilot plant. Firstly, a manual start-up was performed with manual increases in the nitrogen-loading rate (NLR). Secondly, two control strategies for controlled start-up based on oxygen uptake rate (OUR) measurements were successfully implemented and compared in the pilot plant. The successful enrichment of the microbial community in nitrifying microorganisms was corroborated with fluorescence in situ hybridization (FISH) quantification. Finally, the results of both controlled start-up strategies were simulated with a mathematical model considering the nitrification as a two-step process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.