Abstract
AbstractThe correct choice of selection and quality criteria is critical for most starch applications. In this study, a set of different potato starches, selected for a large variation in natural phosphate content and final viscosity, was cationised and tested in a laboratory scale wet‐end paper manufacturing process. Analysis of further parameters expected to be critical for processing, including amylose content and starch granule size, was also performed. Since no significant correlation was found between any of these parameters and paper processing, further attempts were made to find structural or physico‐chemical explanations for the paper processing performance. Hence, several additional parameters of the starches were determined including amylopectin chain length pattern, phosphate substitution, molecular size distribution, pasting‐texture properties and fragility of the gelatinised granules. Among these parameters, the best correlation found to paper filler retention was stickiness of the starch as measured by texture analysis. The starches that performed best in the paper trials showed rapid granule bursts that could be readily estimated from the width of the pasting curve peaks. Light microscopy of non‐soluble remnant starch obtained after gelatinisation of starch under dilute conditions revealed a high proportion of broken granular structures. It is hypothesised that the degree of phosphorylation, together with a hitherto unknown molecular parameter that is related to starch granule fragility, determines starch paste stickiness, which in turn is an important parameter for wet‐end paper manufacturing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.