Abstract

RMR (Rock Mass Rating), or also known as the geo mechanics classification has been modified and made as the International Standard in determination of rock mass weighting. Rock Mass Rating Classification has been developed by Bieniawski (since 1973, 1976, and 1989). The goals of this research are investigate the class of rocks base on classification rock mass rating Bieniawski 1989, to investigate the long mass of the establishment rocks, and also to investigate the distance of the opening tunnel without a support especially in underground mine. On the research measuring: strength intact rock material, RQD (Rock Quality Designation), spacing of discontinuities, condition of discontinuities, groundwater, and also adjustment for discontinuity orientations. On testing samples in the laboratory for coal obtained strong press UCS of 30.583 MPa. Based on the classification according to Bieniawski has a weight of 4. As for silt stone obtained strong press of 35.749 MPa, gained weight also by 4. From the results of the measurements obtained for coal RQD value average 97.38 %, so it has a weight of 20. While in siltstone RQD value average 90.10 % so it has weight 20 also. On the coal the average distance measured in field is 22.6 cm so as to obtain a weight of 10, while for siltstone has an average is 148 cm, so it has weight = 15. Presistence in the field vary, on coal = 57.28 cm, so it has weight is 6 and persistence on siltstone 47 cm then does it weight to 6. Base on table Rock Mass Rating according to Bieniawski 1989, aperture on coal = 0.41 mm. That is located in the range 0.1-1 mm, so it has weight is 4. Besides that, for the siltstone aperture = 21.43 mm. That is located in the range > 5 mm, so the weight = 0. Roughness condition in coal and siltstone classified into rough so it has weight 5. Infilling condition in coal and siltstone classified into none so it has weight 6. Weathering condition in coal and siltstone classified into highly weathered so it has weight 1. Groundwater condition in coal classified into dripping so it has weight 4. and siltstone classified into completely dry so it has weight 15. Discontinuity orientation in coal parallel axis of the tunnel. The range is 251⁰-290⁰ so unfavorable. It has weight = -10. In siltstone also discontinuity parallel axis of the tunnel. The range located between 241⁰-300⁰. Base on weighting parameters according to Bieniawski 1989, concluded for rocks are there in class II with value is 62, and able to establishment until 6 months. For the distance of the opening tunnel without a support as far as 8 meters.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call