Abstract
Graphene nano-electro-mechanical switches are promising components due to their excellent switching performance such as low pull-in voltage and low contact resistance. Mass fabrication with an appropriate counter electrode remains challenging. In this work, we report the stacking of nanocrystalline graphene (NCG) with a 70-nm dielectric separation layer. The buried NCG layer is contacted through the formation of vias and acts as actuation electrode. After metallization, the top 7.5-nm thin NCG layer is patterned to form double-clamped beams, and the structure is released by hydrofluoric acid etching. By applying a voltage between the top and buried NCG layer, a step-like current increase is observed below 1.5 V, caused by the contact of the movable beam with the buried NCG. No pull-out is observed due to the thin sacrificial layer and high beam length, resulting in low mechanical restoring force. We discuss the possible applications of the NCG stacking approach to realize Nano-Electro-Mechanical (NEM) contact switches and advanced logical components such as a AND logic.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.