Stable room-temperature sodium-sulfur battery enabled by pre-sodium activated carbon cloth anode and nonflammable localized high-concentration electrolyte

Abstract

Room-temperature (RT) sodium-sulfur (Na–S) battery is a promising energy storage technology with low-cost, high-energy-density and environmental-friendliness. However, the current RT Na–S battery suffers from various problems, such as poor cycling stability and poor electrolyte-electrode compatibility caused by polysulfide shuttling and active Na-metal anode. Here, a nonflammable localized high-concentration electrolyte (LHCE) (sodium bis(trifluoromethanesulfonyl)imide salt, sulfolane solvent and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether diluent in a molar ratio of 1:2:2), and a pre-sodium activated carbon cloth (NaACC) anode, are combined to enable stable and high-safety RT Na–S battery. In LHCE, the shuttle effect of polysulfide is greatly alleviated, a stable anions-derived NaF-rich cathode electrolyte interphase is formed, and a solid-solid conversion mechanism of a solid S8-solid Na2Sn (1 ≤ n ≤ 3) is achieved. Meanwhile, the Na dendrites and side reactions between electrolyte and anode are effectively inhibited by using NaACC anode. Therefore, under the synergistic effect of electrolyte regulation and negative electrode structure optimization, although using a low N/P ratio of 1.7, the RT Na–S battery also delivers a high initial capacity of 1220.8 mAh g−1, good rate capability and stable cycling performance with a high average Coulombic efficiency of 99.1 %. The capacity still remains at 704.5 mAh g−1 after 100 cycles. This innovative combination of LHCE and NaACC anode in Na–S batteries provides a new idea for further achieving stable RT Na–S batteries with long-cycle-life and high-safety.