Stable Manganese‐Oxide Composites as Cathodes for Zn‐Ion Batteries: Interface Activation from In Situ Layer Electrochemical Deposition under 2 V

Abstract

AbstractA set of multiphase manganese‐oxide composite materials (Mn2O3@Mn3O4 and Mn3O4@Mn5O8), and a birnessite‐type KxMnO2 oxide are prepared and evaluated as cathodes for Zn‐ion batteries. The species formed when the electrodes are subjected to 2 V in aqueous solutions of MnSO4 and ZnSO4 are analyzed, suggesting an interphase activation leading to enhancement of electrochemical response. For the first time, it is shown that a Zn4(SO4)(OH)6.xH2O phase coats the composite‐type electrodes in the charging stage, contributing to extending the lifetime of the batteries. KxMnO2 electrode with layered birnessite structure shows long cycling life at low current densities (122 mAh g−1 at 30 mA g−1 after 50 cycles) and good efficiencies (ca. 99%) in the 0.1 Mn2+ electrolyte. In contrast, in the 0.5 m Mn2+ electrolyte, high values of specific capacity are delivered by the cell at higher rates, that is, 150 mAh g−1 at 600 mA g−1. In Mn5O8@Mn3O4 the good performance is due to the synergistic effect of the two compounds forming the composite. Thus, after more than 100 cycles this composite displays specific capacity values of 175 mAh g−1 at 2150 mA g−1 in the 0.1 m Mn2+/1 m Zn2+ electrolyte.