Abstract
In this work, the generation of dual-wavelength fiber laser at S-band region has been demonstrated with thulium-doped fluoride fiber as gain medium and WS2 thin film as a stabilizer. The generated dual-wavelength fiber laser is achieved in the simple ring cavity with WS2 acted as a birefringence element to suppress mode-hopping and mode competition. A stable dual wavelength fiber laser of spacing approximately 1.17nm is achieved at the pump power of 76.44mW. An OSNR of 31.9dB and maximum peak power difference of 0.5dB are attained at oscillating wavelengths of 1500.08nm and 1501.25nm. The proposed DWFL exhibits maximum wavelength drifting as low as 0.06nm and 0.05nm at 1500.8 08nm and 15001.25nm respectively. This indicates the WS2 is highly potential to be used in optoelectronics technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.