Abstract
High-temperature calcination and reduction treatments of cobalt particles (17–20nm) supported on TiO2 create cobalt particles covered with a TiOy layer. The layer thickness ranges from 2.8 to 4.0nm. These phenomena, commonly called strong metal-support interaction (SMSI), can be used to improve the catalyst stability and change the catalyst selectivity. For example, non-overcoated cobalt catalysts leached during aqueous-phase hydrogenation (APH) of furfuryl alcohol, losing 44.6% of the cobalt after 35h time-on-stream. In contrast, TiOy-overcoated cobalt catalysts did not lose any measurable cobalt by leaching and the cobalt particle size remained constant after 105h time-on-stream. The 1,5-pentanediol selectivity from furfuryl alcohol hydrogenolysis increased with increasing TiOy layer thickness. The stabilized cobalt catalyst also had high yields for APH of xylose to xylitol (99%) and APH of furfural to furfuryl alcohol (95%). These results show that the SMSI effect produces a catalyst with a similar structure as catalysts prepared by atomic layer deposition, thereby opening up a cheaper and more industrially relevant method of stabilizing base-metal catalysts for aqueous-phase biomass conversion reactions. In addition, the SMSI effect can be used to tune catalyst selectivity, thus allowing the more precise atomic scale design of supported metal catalysts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.