Stabilization of mineral oil hydrocarbons in recycled paper pulp by organo-functionalized mesoporous silicas and evaluation of migration to food

Abstract

The occurrence of mineral oil hydrocarbons (MOH) in cellulose-based packaging is mainly due to the offset printing process where MOH are used as a ink pigments’ solvent. The MOH migration from paper/paperboard to food is matter of concern for EFSA, members state authorities, consumers, and food industry. In this study, the feasibility to stabilize MOH by adding a sorbent into recycled paper obtained through a common washing process was investigated and the migration to wheat flour/Tenax® assessed. Among several white/pale yellow porous materials, organo-modified powder silica MCM-41-Si(CH3)3 showed the best combination between affinity for MOH (184% dw) and stability to thermal regeneration. A freshly issued newspaper with >3000 mg MOH kg−1 was used to produce recycled paper at a laboratory-scale plant. MCM-41-Si(CH3)3 was added at the pulping step (1% dw) and the sorbent-enriched pulp handled according to a washing paper production process with no effect on the paper optical brightness. The MOH content of the wheat flour in contact with the sorbent-enriched paper under accelerated migration conditions (15 days at 40 °C) resulted 20% of that contacted with control paper (4.3 ± 1.1 and 20.4 ± 5.5 mg kg−1, respectively), despite its contamination was 24% higher than the control. On the contrary, Tenax® contamination resulted 56.0 ± 10.0 and 47 ± 14.0 mg kg−1 when exposed to sorbent-enriched and control paper, respectively.