Abstract
AbstractPassivation of porous silicon sensors is a critical issue for achieving high sensitivity and selectivity toward biomolecule targets that may be detected in complex physiologic solution. Without appropriate passivation, degradation of the porous silicon matrix inhibits the repeatability of optical measurements and limits applications in complex media. In this work, we present a method for stabilizing TEOS‐HBA monolayers in porous silicon. Annealing of the silane at 200°C for 16 hours, followed by a deionized water wash for a minimum of one hour, results in a porous silicon surface that is highly stable in a number of solvents. Annealing improves cross‐linking of surface‐attached silane molecules for added stability, and hydrolyzing facilitates removal of weakly bound multilayers. This surface treatment procedure is of considerable interest in applications such as DNA synthesis where hydroxyl functionality is critical and a thick silane surface coating is not desired. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.