Abstract
Polyacrylic acid (PAA) has been chosen to stabilize BaTiO3 powder in aqueous solution. Zeta potential studies show that the Ba‐rich particle surface is positively charged in the pH range from 2 to 11 without PAA. Adsorption of PAA decreases the zeta potential in acidic solution and changes the surface to a negative charge in basic solution. Adsorption of PAA onto BaTiO3 surfaces is found to be related to the pH‐dependent PAA conformation in solution. The amount of PAA adsorbed at pH 1.5 is one order of magnitude more than at pH 10.5, due to a more compact polymer conformation. Colloid stability of aqueous BaTiO3 suspension is related to the dissociation of PAA as a function of pH. BaTiO3 suspensions can be stabilized at pH values higher than 7, where more than 99% of carboxylic groups are ionized. At pH 10.5, suspension stability is related to the PAA coverage on BaTiO3 particle surface. Stabilization can be achieved only when conditions of both PAA ionization and BaTiO3 surface coverage are satisfied, suggesting an electrosteric stabilization mechanism. Green density of 62% can be achieved by slip casting at a pH above 10, compared to the best density of 58.6% by isostatic pressing at 242 MPa.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
