Abstract
The change of tool tip frequency response caused by the posture dependence of robot dynamic is one of the key problems that make it difficult to accurately predict the milling stability of robot. In this paper, a tool tip frequency response prediction method considering the interface stiffness characteristics of spindle-tool system is proposed for stability prediction of robotic milling under the condition of posture variation. Firstly, the interface stiffness models of spindle-toolholder, toolholder-spring clip and spring clip-tool are established based on Yoshimura's unit area method. Then, The dynamics model for the robot body and the interface stiffness models for spindle-tool system are imported into the finite element analysis model of the spindle system, so that the prediction of the tool tip frequency response is realized by harmonic response analysis. Compared with the experimental results, the maximum error of the natural frequency was not more than 2 %, and the maximum error of the amplitude was not more than 12 %. Finally, the 2 DOF robot milling stability prediction model is established. Then the robot milling chatter is predicted considering redundant degrees of freedom from the perspective of regenerative chatter prediction theory, and the accuracy of prediction results is verified by milling experiment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
