Stability-Oriented Minimum Switching/Sampling Frequency for Cyber-Physical Systems: Grid-Connected Inverters Under Weak Grid

Abstract

Although the cyber-physical system stability is widely studied, scholars focus more on system stability with communication time delay. Therein, grid-connected inverters with the digital control system are regarded as one simplest and typical cyber-physical system. Meanwhile, the switching/sampling frequency of the inverter is always selected as low as possible from an efficiency viewpoint, resulting in unavoidable delay time. This delay time is apt to cause the system instability, which is more prone to severity under weak grid. To this end, this paper provides a minimum switching/sampling frequency for grid-connected inverters. Firstly, the system impedance model with equivalent delay time is constructed, which is based on padé approximate approach. This equivalent delay time consists of three parts, i.e., sampling delay time in cyber/physical level, calculation delay time in cyber level and pulsewidth modulation delay time in physical level, which reflects the cyber-physical interaction impact. Furthermore, the stability forbidden criterion is applied to make the switching/sampling frequency solving process become Hurwitz matrix identification problem through space mappings. Based on these space mappings, an adaptive step search approach is adopted to obtain the minimum switching/sampling frequency. Finally, the proposed approach can well evaluate the system stability under different frequencies through simulation and experiment.