Stability assessment and slope design at Sandsloot open pit, South Africa

Abstract

Sandsloot open pit is located on the northern limb of the Bushveld Igneous Complex. It is the largest open pit platinum mine in the world. Three major joint sets have been recognized at Sandsloot, which are related to the regional tectonic history. They have an important influence on slope stability in the open pit, notably in terms of planar and wedge failures. Detailed geological and geotechnical data are often a notable unknown factor in the design and operation of an open pit, the lack of which may pose a significant risk to the mining venture. As data are accumulated and used effectively, so the risk of unforeseen conditions is reduced, and accordingly safety and productivity is increased. Usually, the geotechnical work undertaken at an open pit mine is in connection with improving slope stability. At Sandsloot open pit geological and geotechnical data have been obtained by face mapping, scanline surveys, from exploration drillholes and from laboratory tests. Such data have been used to delineate different geotechnical zones in which different types of slope failure have occurred. These are the usual types of slope failure associated with rock masses, namely, planar, wedge, toppling and circular failures. Analysis of the data has allowed optimum design parameters to be developed for these zones which has led to improved slope stability. In other words, this has allowed slope management programmes to be initiated, as well as slope optimization of the hangingwall. The latter resulted in an improved slope configuration and an increase in the ultimate angle of the wall by 7°. This has resulted in substantial savings, as well as an improvement in safety.