Abstract

A megahertz-driven plasma jet at atmospheric pressure—the so-called micro-scaled atmospheric pressure plasma jet (μAPPJ)—operating in pure argon has been investigated experimentally and by numerical modelling. To ignite the discharge in argon within the jet geometry, a self-made plasma tuning unit was designed, which additionally enables measurements of the dissipated power in the plasma itself. Discharges in the α-mode up to their transition to the γ-mode were studied experimentally for varying frequencies. It was found that the voltage at the α–γ transition behaves inversely proportional to the applied frequency f and that the corresponding power scales with an f 3/2law. Both these findings agree well with the results of time-dependent, spatially one-dimensional fluid modelling of the discharge behaviour, where the f 3/2 scaling of the α–γ transition power is additionally verified by the established concept of a critical plasma density for sheath breakdown. Furthermore, phase resolved spectroscopy of the optical emission at 750.39 nm as well as at 810.37 nm and 811.53 nm was applied to analyse the excitation dynamics of the discharge at 27 MHz for different applied powers. The increase of the power leads to an additional maximum in the excitation structure of the 750.39 nm line emission at the α–γ transition point, whereas the emission structure around 811 nm does not change qualitatively. According to the fluid modelling results, this differing behaviour originates from the different population mechanisms of the corresponding energy levels of argon.

Highlights

  • In order to support the experimental investigations of the atmospheric pressure plasma jet, the time-dependent, spatially onedimensional fluid-Poisson model described in detail in [36] was adapted for numerical modelling of the argon plasma under consideration

  • The measured change of the root mean square (RMS) voltage with changing dissipated power is shown for the frequencies specified in table 1

  • A self-made plasma tuning unit was designed which makes the ignition of discharges in argon within the jet geometry possible

Read more

Summary

Introduction

Atmospheric pressure plasma jets have garnered increasing interest in the past decade due to their applicability in research fields such as plasma medicine, involving various biomedical. Applications ranging from surface modification and biological decontamination to therapeutic treatment [1, 2]. Plasma jets have several advantages compared to volume or surface dielectric barrier discharges concerning the enhanced control of discharge conditions and reactive species output. A feed gas has to be supplied for the operability of plasma jets. Noble gases are used for this purpose

Current address
Experimental setup of the plasma jet and the power supply
Experimental diagnostics
Electrical characterization and dissipated power measurement
Phase resolved optical emission spectroscopy
RMS in accordance with
Numerical model
Electrical characteristics and α to γ mode transition
Excitation dynamics
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call