Stability Analysis and Augmentation Design of a Bionic Multi-Section Variable-Sweep-Wing UAV Based on the Centroid Self-Trim Compensation Morphing

Abstract

In this study, a design scheme for a high-aspect-ratio bionic multi-section variable-sweep wing unmanned aerial vehicle (UAV) that utilizes the reverse coordinated change in the sweep angle of the inner and outer wing sections is proposed, which improves the aerodynamic performance and realizes the self-trim compensation of the wing’s centroid. According to the layout characteristics of this type of UAV, a reasonable distribution design of the wingspan ratio of the inner and outer sections is explored, to reduce the impact of aerodynamic center movement and moment of inertia change. The calculation and analysis results show that the coordinated variable-sweep scheme can significantly improve the influence of sweep angle change on the longitudinal static stability margin of UAVs with a high aspect ratio. The coordinated sweep angle change in the inner and outer wing sections can not only reduce the drag during high-speed flight, but also play a significant role in improving the performance of the aircraft at different stages in the mission profile. Appropriately increasing the wingspan proportion of the inner section can reduce the trim resistance of the V-tail, reduce the thrust of the engine, and increase the range and duration of the UAV. From the perspective of stability change, the multi-section variable-sweep wing UAV with a wingspan ratio of the inner and outer sections that is between 1.41 and 1.78 has better dynamic stability performance. Among them, the UAV with a wingspan ratio of the inner and outer sections that is equal to 1.41 has better longitudinal stability performance, while the UAV with a wingspan ratio of the inner and outer sections that is equal to 1.78 has better lateral/directional stability performance.