SSB-Based Signal Processing for Passive Radar Using a 5G Network

Abstract

This paper presents an alternative processing chain for the passive radar using fifth-generation (5 G) standard technology for broadband cellular networks as illuminators of opportunity. The proposition is to use a 5 G synchronization signal block's (SSB) periodically transmitted modulated pulse in 5G-based passive coherent location (PCL) system processing. Although the SSB periodicity limits the velocity ambiguity, the paper describes a solution to tackle this problem in a single target scenario. The method is advantageous when there is a lack of transmission in the telecommunication channel, and the 5 G SSB is the only existing signal. The paper proposes a signal processing pipeline for 5G-based PCL that is inspired by passive radars using non-cooperative pulse radar as an illumination source. The method has been validated using simulated and real-life 5 G data measurements. The results presented in the paper show the possibility of detecting a moving target with a lack of data transmission in the 5 G network, using only the SSB when the classical passive radar signal processing fails. The presented results prove the possibility for a significant increase of 5 G network-based PCL utilization in short-range applications.