SrB4O7:Sm2+ fluorescence improves the accuracy of temperature measurements in externally heated diamond anvil cells.

Abstract

The sample temperature in an externally heated diamond anvil cell (EHDAC) is generally measured by a thermocouple fixed to the pavilions of diamond anvils, ignoring the temperature difference between the thermocouple and the sample. However, the measured temperature depends strongly on the placement of the thermocouple, thus seriously reducing the accuracy of the temperature measurement and hindering the use of EHDAC in experiments requiring precise temperature measurements, such as high-pressure melting and phase-diagram investigations. In this study, the full width at half maximum (FWHM) of the 0-0 fluorescence line of strontium borate doped with bivalent samarium ions (SrBO4:Sm2+, SBO) is found to be highly sensitive to temperature and responds extremely rapidly to small temperature fluctuations, which makes it an excellent temperature indicator. We propose herein a precise method to measure temperature that involves measuring the FWHM of the 0-0 fluorescence line of SBO. This method is used to correct the temperature discrepancy between the thermocouple and the sample in an EHDAC. These corrections significantly improve the accuracy of temperature measurements in EHDACs. The accuracy of this method is verified by measuring the melting point of tin at ambient pressure. We also use this method to produce a tentative elementary phase diagram of tin up to 109GPa and 495K. This method facilitates high-pressure, high-temperature experiments demanding accurate temperature measurements in various disciplines. The study also discusses, in general, the experimental approach to measuring temperature.