Abstract
AbstractThe effects of surface roughness on the squeeze film characteristics between a sphere and flat plate covered with a thin porous layer are investigated in this paper. The sphere and the plate are separated with a non‐Newtonian lubricant of a micropolar fluid. The well‐established Christensen stochastic theory of hydrodynamic lubrication of rough surfaces is used to incorporate the effects of surface roughness into the Reynolds equation. The film pressure distribution is solved and other squeeze film characteristics, such as the load‐carrying capacity,and time–height relationship, are obtained. The results indicate that lubrication by a micropolar fluid will increase the load‐carrying capacity and lengthen the squeeze film time, regardless to the surface rough and porosity of the flat plate. It is also found that excessive permeability of the porous layer causes a significant drop in the squeeze film characteristics and minimises the effect of surface roughness. For the case of limited or no permeability, the azimuthal roughness is found to increase the load‐carrying capacity and squeeze time, whereas the reverse results are obtained for the case of radial roughness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.