Spur gear wear analysis as applied for tribological based predictive maintenance diagnostics

Abstract

This paper describes an experimental investigation on a pair of spur gears in which wear and pitting were intentionally allowed to occur, namely, moisture corrosion pitting, acid-induced corrosion pitting, hard contaminant-related pitting and mechanical induced wear. A back to back spur gear test rig was used throughout 32 test series. The tests samples of wear debris were collected and assessed through the utilization of an optical microscope in order to correlate and compare the debris morphology to pitting and wear degradation of the worn gears. In addition, weight loss from all test gear pairs were assessed with utilization of statistical design. It was observed that there were significant distinctions between both weight losses, wear debris morphology generated from each induced pitting conditions and worn surface characteristics. It can be deduced that wear debris characteristics exhibited a direct relationship with different pitting and wear modes. Thus, it should be possible to detect and diagnose gear pitting and wear utilization of worn surfaces, generated wear debris and quantitative measurement such as weight loss.