Abstract
The statistical distributions of critical currents in series arrays of YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary junctions have been studied by low-temperature laser scanning microscopy. A set of arrays has been fabricated on [110] NdGaO/sub 3/ bicrystal substrates with misorientation angles from 2 /spl times/ 10/spl deg/ up to 2 /spl times/ 26/spl deg/ and patterned to the widths from 1.7 up to 5 micrometers. The critical current values of the individual junctions in the array have been obtained by focusing a laser beam on each junction and measuring the bias current at which the maximum laser-induced voltage response has appeared on the array. The measured critical current distributions have been demonstrated to be close to a log-normal Gauss function. A spread of this distribution has been found to increase with a bicrystal angle. YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary topography has been studied by atomic force microscopy. From results of these measurements we suppose that the maximum values of critical current density might be assigned to the symmetrical facets of grain boundary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
