Abstract
The effects of gadolinia-doped ceria (CGO, Ce 0.8Gd 0.2O 1.9− x ) and yttria-doped zirconia (8YSZ, Zr 0.92Y 0.08O 2− x ) interlayers prepared by spray pyrolysis between vacuum plasma-sprayed 8YSZ electrolytes (8YSZ–VPS) and screen-printed (La 0.8Sr 0.2) 0.98MnO 3 cathodes (LSM) on the power output of solid oxide fuel cells (SOFC) are investigated. Amorphous thin films are deposited and then converted to nanocrystalline electrolyte–cathode interlayers during the first heat-up cycle of a SOFC to the operating temperature. CGO thin films between the YSZ plasma-sprayed electrolyte and the LSM cathode increased the power output by more than 20% compared to cells without interlayers, whereas YSZ films degraded the power output of cells. It is assumed that CGO improves the charge transfer at the electrolyte–cathode interface and that the CGO layer prevents the formation of undesirable insulation of La-zirconate at the interface 8YSZ/LSM.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.