Abstract
We have investigated for the preparation of NiZn ferrite thin films from Ni, Zn and Fe nitrates mixed aqueous solutions at a substrate temperature between 350 and 500 °C by a spray pyrolysis deposition (SPD). The crystallinity of the prepared NiZn ferrite films with the thickness of about 1 μm became higher with increasing substrate temperature during a film deposition, but these as-prepared films could not show sufficient magnetic properties for practical use. Post-preparation annealing above 600 °C was necessary to get enough magnetic properties. The NiZn ferrite film having the saturation magnetization of 0.37 T was obtained after annealing at 750 °C for 2 h in air and the value was very close to that of the bulk ferrite. Also, it is noted that the film exhibited very high magnetic resonance frequency exceeding the value from Snoek's limit for a bulk specimen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
