Abstract
The ignition of combustible material by contact with hot metal particles is an important pathway by which wildland and urban spot fires are started. This work examines how fuel characteristics such as density, morphology and chemical composition effect the ability of the fuel to be ignited by a hot metal particle. Fuels were prepared out of three materials: alpha-cellulose, a barley/wheat/oat grass blend, and pine needles. Each material was prepared as a powder and as larger, long pieces: strips of cellulose paper, loose grass, and pine needles. These fuels are representative of thermal insulation (cellulose strips), dry grasses (grass blend), forest litter (pine needles) and duff (powders). Aluminum particles ranging from 2 mm to 8 mm in diameter heated to temperatures between 575°C and 1100°C were dropped onto these fuels. The particle temperature required for ignition becomes higher as the particle size decreased. The results show that the required temperatures for ignition of powders were lower, with this trend particularly pronounced for the alpha-cellulose fuels. The biomass fuels required higher temperature particles to ignite, indicating that the presence of other ligno-cellulosic materials make ignition more difficult.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
