Abstract

A simple method has been developed for the spontaneous deposition of Prussian blue (PB) particles from a solution containing only ferricyanide ions onto conducting substrates such as indium tin oxide glass, glassy carbon disk and carbon nanotube (CNT) materials. Formation of PB deposits was confirmed by ultraviolet-visible absorption spectrometry and electrochemical techniques. The surface morphology of the PB particles deposited on the substrates was examined by atomic force microscopy and scanning electron microscopy. CNT/PB composite modified glassy carbon electrodes exhibited an electrocatalytic property for hydrogen peroxide reduction. These modified electrodes exhibited a high sensitivity for electrocatalytic reduction of hydrogen peroxide at −0.05 V (vs. Ag|AgCl), probably due to the synergistic effect of CNT with PB. Then, CNT/PB modified electrodes were further developed as amperometric glucose biosensors. These biosensors offered a linear response to glucose concentration from 0.1 to 0.9 mM with good selectivity, high sensitivity of 0.102 A M−1 cm−2 and short response time (within 2 s) at a negative operation potential of −0.05 V (vs. Ag|AgCl). The detection limit was estimated to be 0.01 mM at a signal-to-noise ratio of 3.

Highlights

  • Prussian blue (potassium iron(III) hexacyanoferrate(II)) and its analogues form an important class of insoluble mixed valence compounds [1,2,3]

  • Many literature reports demonstrated that carbon nanotube (CNT) modified electrodes offered electrocatalytic effects to biomolecules such as dopamine (DA) [32,33], β-nicotinamide adenine dinucleotide (NADH) [34,35], glucose [36,37] and H2O2 [38] based on the ability of CNT to improve electron transfer rates of enzymes and other biomolecules

  • A glassy carbon electrode modified with the CNT/Prussian blue (PB) material (GC/CNT/PB) showed better electrocatalytic behavior for the reduction of H2O2 compared to electrodes incorporated with either PB or CNT alone, indicating a synergistic effect when both PB and CNT were present

Read more

Summary

Introduction

Prussian blue (potassium iron(III) hexacyanoferrate(II)) and its analogues form an important class of insoluble mixed valence compounds [1,2,3]. Many literature reports demonstrated that CNT modified electrodes offered electrocatalytic effects to biomolecules such as dopamine (DA) [32,33], β-nicotinamide adenine dinucleotide (NADH) [34,35], glucose [36,37] and H2O2 [38] based on the ability of CNT to improve electron transfer rates of enzymes and other biomolecules. Preparation of the CNT/PB composite usually employed direct reaction/interaction between ferric species and ferricyanide ions [2,19] through chemical or electrochemical methods, followed by mixing with or deposition on CNT materials. A glassy carbon electrode modified with the CNT/PB material (GC/CNT/PB) showed better electrocatalytic behavior for the reduction of H2O2 compared to electrodes incorporated with either PB or CNT alone, indicating a synergistic effect when both PB and CNT were present. The performance of the resulting GC/CNT/PB/PPD-GOD electrode for glucose detection has been evaluated

Deposition of Prussian Blue on Different Electrode Substrates
Mechanism for the Spontaneous Deposition of Prussian Blue
Chemicals and Instruments
Spectroscopic Characterization of Electrode Substrates
Amperometric Determination
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.