Abstract
Fe 3 O 4 shows great potential in the energy storage field; however, the low conductivity, particles aggregation and large volume change during the electrochemical process seriously limit its practical application. Here, spindle-shaped core-shell Fe 3 O 4 @N-doped carbon scattered in graphene (Fe 3 O 4 @NCm/rGO) has been successfully fabricated. SEM and TEM results indicate that the N-doped carbon shell with a thickness of 10 nm was homogenously coating on the spindle-shaped Fe 3 O 4 surface, and at the same time the Fe 3 O 4 @NCm particles evenly dispersed on the graphene sheets. Profiting from the N-doped carbon shell and graphene, the Fe 3 O 4 @NCm/rGO electrode delivers excellent electrochemical performances both in Li and Na ion half-cells (720 mAh g −1 at 1000 mA g −1 after 500 cycles and 237 mAh g −1 at 1000 mA g −1 after 2500 cycles for Li and Na ion half-cells, respectively). And most importantly, the Fe 3 O 4 @NCm/rGO electrode also presents superior lithium and sodium storage performances in Li and Na ion full-cells with 526 mAh g −1 for Li-ion full cell and 192 mAh g −1 for Na-ion full cell. These results demonstrate that the Fe 3 O 4 @NCm/rGO composites have great promising applications as anodes in both commercial Li/Na-ion batteries. • Synthesis of hollow Fe 3 O 4 through homogeneous shrinkage. • The synergistic effect of graphene and carbon layers mitigates volume changes and improves material conductivity. • The Fe 3 O 4 @NCm/rGO was used in lithium, sodium ion batteries and coin-type full batteries simultaneously, and delivered good performance. • Pseudocapacitance tests reveals why the composites displayed excellent electrochemical performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have