Abstract
Platinum (Pt) is the most commonly used counter electrode material for DSSCs. However, as Pt is a noble metal and expensive, researchers have tried to replace the Pt counter electrode with a variety of materials. In this study, graphene oxide (GO) powders were added to solvents of different polarities as precursor solutions for the counter electrode. The solvents were deionized water, dimethylformamide, isopropanol, and chlorobenzene in descending order of polarity. The prepared GO precursor solutions were coated on the Florine doped Tin Oxide (FTO) glass substrate via spin coating, then coated substrate subjected to thermal reduction reaction to obtain reduced graphene oxide, which was used as the counter electrode of the DSSC. The photoelectric conversion efficiency (PCE) of DSSC using deionized water as the dispersing solvent was 2.70%, which was five times higher than that of DSSC using chlorobenzene.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
