Spectrum sensing using 16-QAM and 32-QAM modulation techniques at different signal-to-noise ratio: a performance analysis

Abstract

<p>Spectrum sensing techniques are implemented for effective use of spectrum resources in the cognitive-radio. In this research work attempt has been made for the performance of energy detector with cooperative spectrum sensing using double dynamic threshold on the MATLAB software. Additive white gaussian noise is used and the frequency range between 54 MHz to 862 MHz is considered with wideband. Findings in receiver operative curve have been observed to analyze probability-of-detection (𝑃𝑑) under different values of probability-of-false alarm (𝑃𝑓) condition and diverse ranges of signal to noise ratio with different number of samples of input signal. Presence and absence of primary user has been marked by using a hypothetical model based on Neyman pearson approach. From the results, it has been observed that more the number of sample values, better is the probability-of-detection (𝑃𝑑) value as achieved for 32-QAM signal as compared to 16-QAM signal. Also, better results have been witnessed at -9db signal to noise ratio value as compared to -15db and -20db. This work provides almost 10% of enhancement in the probability of detection at -9db signal to noise ratio for 16-QAM modulated signal as compared to the existing model where the implementation of energy detector spectrum sensing technique through simulink model.</p>